Liz,

While I've never done it myself, I don't see why this isn't possible. The only thing I would recommend is taking a look at possibly placing some green board behind them (this is the waterproof backer board typically used behind tiles in showers and bathtubs).

Most of us aren't aware of the fact that backsplashes, while decorative, really do have a function and purpose of protecting the wall behind the counter from all of the water that is applied to it. So the green board might be a really good idea. Check at your local home improvement center to be certain. As for cutting it, if it's anything like Hardi Backer (cementified backer board for under floors and countertops) it should be easy, just mark it, score it and snap!

As for putting in the tin tiles, what I do know about their installation is the fact that they are typically applied with nails on furring strips (these are thin strips of wood attached to the ceiling at strategic points so that the tin can be firmly attched to them). Unless you have tiles that fit the entire space from countertop to base of the above cabinet, you may need to get a bit creative on how to finish off the top edge of them, though I'd bet if you look online you'd find a company that makes an easy to install product with the perfect edge to finish off the project.

Best of luck to you and please remember to take before and after pictures of whatever you do and post them on the site to inspire other women in their home improvement persuits.

Hugs 'n hammers,

Heidi

Hi Liz I had intended to use tin tiles as my backsplash. I went on e-bay to buys some and wound up finding plastic ones that looked like tin tiles. They came in 4 by 2 foot sheets. They were so easy to install. I basically just measured, cut with heavy duty scissors then used a construction adhesive to secure them. I got them in white, which i intended to paint, but haven't decided what color yet, so for now the white looks nice. Betty Anne